Maytag dishwashers are equipped with advanced diagnostics to assist users in identifying and resolving issues quickly. This guide explains common error codes, flashing lights, their meanings, and troubleshooting steps.
Maytag Dishwasher Error Codes: Common Error Codes and Their Meanings
Maytag Dishwasher Error Code: E1
Meaning: The dishwasher is not heating the water to the required temperature.
Possible Solutions:
Check the water heater’s functionality.
Ensure the water inlet temperature is at least 120°F.
Inspect the heating element for continuity.
Replace the thermostat if it is faulty.
Maytag Dishwasher Error Code: E3
Meaning: The water temperature is not reaching the desired level during the wash cycle.
Possible Solutions:
Verify the water heater is operational.
Ensure the water supply temperature is correct.
Check the heating element and replace it if necessary.
Maytag Dishwasher Error Code: E4
Meaning: The dishwasher is unable to drain water properly.
Possible Solutions:
Ensure the drain hose is not kinked or clogged.
Check the drain pump for obstructions.
Inspect and clean the filters.
Replace the drain pump if it’s not functioning.
Maytag Dishwasher Error Code: E6
Meaning: The dishwasher is experiencing problems with filling water.
Possible Solutions:
Check the water inlet valve for blockages.
Ensure the water supply is turned on and has adequate pressure.
Inspect the float switch for any obstructions.
Maytag Dishwasher Error Code: E7
Meaning: The drying system is malfunctioning.
Possible Solutions:
Inspect the heating element used for drying.
Check the vent assembly for blockages.
Replace any faulty drying components.
Maytag Dishwasher Error Code: F1E1
Meaning: There is an issue with the electrical control system.
Possible Solutions:
Reset the dishwasher by disconnecting it from power for a few minutes.
Inspect the control board for signs of damage or corrosion.
Replace the control board if it’s not working.
Maytag Dishwasher Error Code: F2E2
Meaning: There is a communication problem between the dishwasher’s control boards.
Possible Solutions:
Check the wiring connections between control boards.
Ensure all connectors are securely in place.
Replace any damaged wiring or connectors.
Maytag Dishwasher Error Code: F3E2
Meaning: The temperature sensor is malfunctioning.
Possible Solutions:
Test the temperature sensor for continuity using a multimeter.
Replace the sensor if it’s defective.
Inspect the wiring to the sensor for any damage.
Maytag Dishwasher Error Code: F4E3
Meaning: The wash motor is not functioning correctly.
Possible Solutions:
Check the wash motor for obstructions.
Test the motor for continuity.
Replace the wash motor if it’s faulty.
Maytag Dishwasher Error Code: F6E1
Meaning: There is an issue with the water inlet valve.
Possible Solutions:
Verify the water inlet valve is receiving power.
Inspect the valve for blockages.
Replace the water inlet valve if necessary.
Maytag Dishwasher Error Code: F6E3
Meaning: The water level in the dishwasher is incorrect.
Possible Solutions:
Ensure the water inlet and outlet valves are functioning correctly.
Check the float switch for proper operation.
Adjust the water level sensor if needed.
Maytag Dishwasher Error Code: F6E4
Meaning: The water supply tap is closed.
Possible Solutions:
Ensure the water supply tap is fully open.
Check for any blockages in the water supply line.
Inspect the inlet valve for proper operation.
Maytag Dishwasher Error Code: F7E2
Meaning: There is an issue with the water flow meter.
Possible Solutions:
Check the flow meter for blockages or damage.
Replace the flow meter if it’s malfunctioning.
Inspect the wiring to the flow meter.
Maytag Dishwasher Error Code: F8E2
Meaning: The water softener is not functioning correctly.
Possible Solutions:
Inspect the water softener for salt bridging.
Ensure the regeneration cycle is functioning properly.
Replace any defective components of the water softener.
Maytag Dishwasher Error Code: F8E4
Meaning: The dishwasher does not detect water entering the machine.
Possible Solutions:
Check the water supply and the inlet valve.
Ensure the inlet valve is not clogged.
Inspect the float switch for obstructions.
Maytag Dishwasher Error Code: F8E5
Meaning: The flow meter is not functioning.
Possible Solutions:
Replace the flow meter.
Check for continuity in the flow meter wiring.
Ensure the flow meter is properly connected.
Maytag Dishwasher Error Code: F9E1
Meaning: There is a software-related issue.
Possible Solutions:
Reset the dishwasher.
If the error persists, consult a technician for a software update or control board replacement.
Maytag Dishwasher Error Code: H2O
Meaning: The water level is too low.
Possible Solutions:
Ensure the water supply is adequate.
Check the inlet valve for blockages.
Inspect the float switch and water level sensor.
Flashing Lights and Their Meanings
Maytag Dishwasher Flashing Light: Clean Light Flashing
Meaning: There might be a water heating problem.
Possible Solutions:
Check the heating element for continuity.
Inspect the thermostat.
Ensure the inlet water temperature is sufficient.
Maytag Dishwasher Flashing Light: Sanitize Light Flashing
Meaning: The cycle did not reach the necessary sanitizing temperature.
Possible Solutions:
Verify the inlet water temperature is adequate.
Check the heating element.
Ensure the cycle settings are correct.
Maytag Dishwasher Flashing Light: All Cycle and Option Lights Flashing
Meaning: A critical error has occurred.
Possible Solutions:
Reset the dishwasher by disconnecting the power for a few minutes.
Inspect the control board for damage.
Consult a technician if the problem persists.
Beeping and Flashing Patterns
Maytag Dishwasher Error Code: 10 Pause 5 Pause (Stuck Key Error)
Meaning: A key on the keypad is stuck.
Possible Solutions:
Inspect the keypad for stuck buttons.
Clean the keypad.
Replace the control panel if necessary.
Maytag Dishwasher Error Code: 1 Pause 1 Pause (Door Latch Issue)
Meaning: There is an issue with the door latch.
Possible Solutions:
Ensure the door is closing properly.
Check the door latch for damage.
Replace the door latch if it’s not working.
Maytag Dishwasher Error Code: 6 Pause 1 Pause (Water Inlet Fault)
Meaning: The dishwasher is having trouble filling with water.
Possible Solutions:
Check the water inlet valve for blockages.
Ensure the water pressure is adequate.
Inspect the float switch.
Maytag Dishwasher Error Code: 8 Pause 1 Pause (Heating Element Failure)
Meaning: The heating element is not functioning.
Possible Solutions:
Test the heating element for continuity.
Replace the heating element if necessary.
Inspect the thermostat.
Maytag Dishwasher Error Code: 8 Pause 4 Pause (Temperature Sensor Fault)
Meaning: There is an issue with the temperature sensor.
Possible Solutions:
Test the temperature sensor.
Replace the sensor if it’s defective.
Check the wiring to the sensor.
Maytag Dishwasher Error Code: 8 Pause 5 Pause (Water Circulation Pump Issue)
Meaning: The water circulation pump is malfunctioning.
Possible Solutions:
Inspect the pump for obstructions.
Test the pump for continuity.
Replace the pump if needed.
Maytag Dishwasher Error Code: 9 Pause 1 Pause (Diverter Valve Issue)
Meaning: The diverter valve is not working correctly.
Possible Solutions:
Check the diverter valve for obstructions.
Inspect the wiring to the valve.
Replace the diverter valve if necessary.
Front Status Light Indicators
Maytag Dishwasher Error Code: Front Status Lights
Meaning: Different flashing patterns can indicate various issues such as water heating problems, door latch issues, or control board errors.
Possible Solutions:
Refer to the user manual for specific light patterns.
Follow the troubleshooting steps outlined for each pattern.
Consult a technician if the problem persists.
Maytag Dishwasher Flashing Light: Sanitize Light Flashing
Meaning: The sanitize cycle did not complete successfully.
Possible Solutions:
Check the water temperature.
Inspect the heating element.
Ensure the cycle settings are correct.
Conclusion
Understanding Maytag dishwasher error codes and flashing lights can help you diagnose and resolve issues efficiently. Regular maintenance and prompt attention to error codes can
Comments